web statistics
Engrz News

Correction in 10-TE (8th term) Result – MUET

engrz-results

C O R R I G E N D U M In continuation of the gazette issued vide No. MUET/EXAM/RESULT/-300 dated 05-05-2014 regarding announcement of the result of Regular Examination of Second Term Final Year (8th Term) B.E Textile Engineering of 10-Batch, there was correction detected in the weighted percentage of 3rd year in which now revised and corrected as ... Read More »

Top Ten positions in 11-PG (7th Term) MUET

top-10-positions-muet

Department of Petroleum and Natural Gas Engineering, Mehran University of Engineering and Technology has announced 11-PG (7th Term) Result here on Tuesday (30th-Septemper 2014). Total 83 Students were appeared in the 7th term examination in May/June 2014 and 52 Students cleared all the subjects where as 25 students are failed in different subjects, 04 students are successful in as per ... Read More »

Top 10 Positions in 11-Mechanical (7th Term) MUET

business-success

Department of Mechanical Engineering, Mehran University of Engineering and Technology has announced 11-ME (7th Term) Result here on Tuesday (30th-Septemper 2014). Total 134 Students were appeared in the 7th term examination in May/June 2014 and 82 Students cleared all the subjects where as 41 students are failed in different subjects, six students are successful in as per rule policy but ... Read More »

Safety Precautions while Working on Lathe Machine

safety 1

One should always be sure that all guards are in place before running the machine. 2. Always clamp the work and tool properly with correct size of work and tool holding device. 3. Always keep the machine clear of tools. 4. Machine should be stopped before making measurements or adjustments. 5. Wear an apron or a properly fitted shop coat. ... Read More »

Safety by Workplace Layout and Proper Working Conditions

Some safety using workplace layout and proper working conditions are given as under: 1. A suitable layout and proper working conditions play an important role in preventing accidents which would have otherwise occurred. 2. Moving path or passage ways should be clearly marked and never be obstructed. 3. Every employee should have enough space to move and operate the machine. ... Read More »